Sprinco Reduced Power Buffer Spring - AR-15 Carbine

SPRINCO Reduced Power Buffer Spring - AR15 Carbine (Yellow)

8 Review(s) Write a Review

Your Price: $19.95

Sprinco Reduced Power Buffer Spring (Yellow)

Part Number: SPRINCO-25113

Availability: In Stock.

Quantity

High Quality: Sourced from Sprinco USA, these buffer springs are made from certified Chrome Silicon wire stock to ISO 9001:2008 quality standards.
Reduced Strength for Special Applications: This spring is perfect for ARs that cycle soft and tend to short-stroke with stronger springs. Designed specifically for .300 BLK which is notorious for cycling very soft, especially with subsonic ammo.
Long Service Life: Springs are precision wound, heat treated, stress relieved, and shot peened for extended life, with an expected service life in excess of 30,000 rounds.
Corrosion and Wear Resistance: Springs are moly plated for improved corrosion and wear resistance.

Description
Customer Reviews
Compatibility
FAQ

SPRINCO Reduced Power Buffer Spring - AR-15 Carbine (Yellow)
For AR15 .300 BLK or soft cycling guns

This is the perfect spring for those soft cycling AR15s that tend to short-stroke and not lock back on an empty mag with a stronger spring. Designed specifically for .300 BLK since they are notorious for cycling very soft, especially with subsonic ammo. Sprinco USA Springs are made from certified Chrome Silicon wire stock to ISO 9001:2008 quality standards to withstand extreme heat and high cyclic rate. This ensures consistency in performance through high round counts. They are precision wound, heat treated, stress relieved and shot peened for extremely long service life and then moly plated for improved corrosion and wear resistance. Expected service life is in excess of 30,000 rounds.

Features:

Heat Treated
Stress Relieved
Shot Peened
Moly Plated
Extremely Long Service Life

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

View All Reviews - Reset

Reviews Sorting

Solved cycling issue for subsonic 300BLKLK

Even suppressed there wasn't always enough gas pressure to make my AR 300 cycle properly. Dropped in this spring and problem solved.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Robert Buyher from Alabama on 7/1/2024

Texas Guard Operator

Great product, works well with individuals who run 300 blk subs.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Derreck from Dale tx on 7/18/2024

Amazing Spring

My AR cycles excellent now, low recoil amazing performance

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Ismal from P.R on 5/23/2024

Great spring

So have a 300blk that was really undergassed. With a suppressor it ran fine with out short stokes horribly. Put this in and it functions flawlessly. Glad I found this.

Did you find this helpful?

Reviewed by: Bartholomew Benn from MURFREESBORO on 6/26/2024

Perfect Balance

I purchased this spring and a hydraulic buffer for my suppressed 300 Blk Out. Running subsonic ammo with gas block wide open, this rifle cycles perfectly at 4 O’clock. My only complaint is that the yellow coating that was used on the spring for identification is the wrong paint or surface preparation was not done properly. When installing the spring, any part of the spring that touched the retainer chipped the paint off and sent bits of paint all through my lower receiver.

Did you find this helpful?

Reviewed by: Justin from Ohio on 5/13/2024

What Buffer Spring is best for my build?
- For PCC builds, we recommend using the strongest buffer spring that cycles reliably and consistently in your build. If it has a bolt catch in use, we recommend ensuring that the spring allows for reliable function of the bolt catch on an empty magazine. If the bolt doesn’t lock back on the last round, it is often due to too strong of a buffer spring for your gun and going down a step on spring power usually solves this problem. In PCC builds, there is often some trial and error on buffer spring selection. Every gun cycles somewhat uniquely even with the same build specs. So, there are typical combinations that work well, but you have to see for yourself what works best in your gun with your ammo.
- For 9mm PCC builds, use an AR10/.308 carbine buffer spring for barrels that are 8” or longer. For shorter barrels, more trial and error is often needed, but some type of .223 carbine spring is normally appropriate. Extra power .223 springs are normally best in all but the softest running systems.
- For AR15 or AR10 rifle buffer tubes, always use the AR15 rifle buffer and AR15 rifle buffer spring or AR10 rifle buffer and AR10 rifle buffer spring.
- For AR10 carbines with either the AR15 or AR10/A5 buffer tube, always use an AR10/.308 carbine buffer spring.
- For AR15 carbines the buffer spring selection is broader and will depend on the specifics of the build.
What is the difference between Sprinco Springs and JP Springs:
- Sprinco Springs use very high quality, certified Chrome Silicon Wire that is cryogenically heat treated, shot peened and moly plated. This gives these springs a very long service life. Running these springs for 10s of thousands of rounds is common. But you do get the typical AR spring twang with these.
- JP Springs use standard music wire, which is a very good spring material but it doesn’t have as long of a service life and is rated at between 5,000 and 10,000 rounds depending on the gun. But the advantage is that they are ground flat on the outer edge which makes them run much smoother and quieter in the buffer tube, so you don’t get the annoying spring noise. This is especially noticeable in suppressed guns. So one spring is for max service life and the other is for smoothest running with the least spring noise.
Does an AR-15 rifle buffer spring work for an ar-10?
- Buffer springs for AR-15 and AR-10 platforms are not interchangeable due to differences in size, strength, and cycling requirements.
- The AR-15 platform is primarily chambered in smaller calibers like .223 Remington/5.56 NATO, while the AR-10 platform is designed for larger calibers like .308 Winchester/7.62 NATO. The buffer springs for each platform are specifically engineered to handle the unique cycling characteristics and pressures of their respective calibers.
- Using an AR-15 buffer spring in an AR-10 could lead to cycling issues, reliability problems, and potential damage to your firearm. It is essential to use the correct buffer spring designed for your specific platform and caliber to ensure optimal performance and safety.
How long will an AR-15 buffer spring last?
- Sprinco USA Springs - These buffer springs are made from certified Chrome Silicon wire stock, precision wound, heat-treated, stress relieved, shot peened, and moly plated for improved corrosion and wear resistance. The expected service life for these springs is in excess of 30,000 rounds.
- JP Enterprises Extra Power Buffer Springs - These buffer springs are center-less ground and polished for silent and smooth operation. They are designed to run smoothly and more quietly than standard buffer springs. The expected service life for these springs is between 10,000 and 20,000 rounds.
How do I change the buffer spring on an ar-15?

Changing the buffer spring on an AR-15 is a relatively simple process. Follow these steps to replace the buffer spring:
1. Ensure the firearm is unloaded: Double-check that the AR-15 is unloaded, and there is no round in the chamber. Remove the magazine if one is present.
2. Separate the upper and lower receivers: Push the rear takedown pin and the front pivot pin on the lower receiver to detach the upper receiver from the lower receiver. Pull the pins out from one side and open the rifle. You may completely separate the upper and lower by pulling the pins out entirely.
3. Remove the buffer and buffer spring: Locate the buffer tube, which houses the buffer and buffer spring. Press down on the buffer retainer (a small pin) located near the front end of the buffer tube. This will release the buffer and buffer spring. Slowly and carefully pull the buffer and spring out of the buffer tube. Be cautious, as the buffer retainer is under spring tension and can fly out if not controlled.
4. Replace the buffer spring: Slide the old buffer spring off the buffer, and slide the new buffer spring onto the buffer. Ensure the spring is seated correctly on the buffer.
5. Reinstall the buffer and buffer spring: Push down on the buffer retainer again and slide the buffer and new buffer spring back into the buffer tube. Release the buffer retainer so it locks the buffer and spring in place.
6. Reassemble the rifle: Reattach the upper and lower receivers by aligning the pivot pinholes and takedown pinholes, and then push the pins back in to secure the two halves.
7. Function check: Perform a function check by working the charging handle, dry firing, and checking the safety selector to ensure everything is working correctly. If everything seems to be functioning properly, your buffer spring replacement is complete.

SPRINCO Enhanced Power Buffer Spring - AR15 Carbine (Blue)

$19.95

In Stock.

(1)

Add To Cart

SPRINCO Buffer Spring - AR10 Carbine (Orange)

$19.95

In Stock.

(3)

Add To Cart

Spike's Tactical ST-T1 Buffer 3.0 oz

$32.95

Out of Stock.

(0)

Add To Cart

SPRINCO Reduced Power Buffer Spring - AR15 Carbine (Yellow)

Related Items