KYNSHOT - Hydraulic Recoil Buffer for AR-15 with collapsible stock (3.25") - High Pressure
This
is a version of the AR15 carbine buffer designed for harder cycling
AR15 rifles. Perfect for any AR15 framed gun that cycles noticeably
harder than the typical .223/5.56 DI gun. Examples include Piston
driven guns, suppressed guns, heavy calibers or calibers with higher gas
pressure, and some SBRs. This buffer is designed with additional
weight for those types of applications.
Also, a great buffer for the
CMMG Delayed Blowback Pistol Caliber Guns.In our experience,
this is the softest running AR buffer on the market. It shock absorbs
more than any other buffer design and makes a noticeable difference in
recoil and shot recovery. Reduce felt recoil, improve reliability,
reduce bolt carrier speed, reduce wear on parts, reduce shock and
vibration to optics, and suppress bolt bounce with this simple drop-in
replacement. Designed for AR-15 rifles with a collapsible stock. This
buffer has a piston that is hydraulically dampened to absorb the shock
of impact from the bolt carrier's rearward motion and to prevent bolt
bounce as a new cartridge is chambered. You will feel less recoil and
smoother operation with this buffer and you will see less movement of
your sights during recoil for faster shot to shot recovery time.
This
buffer is made to the highest quality and durability standards. Can
take all the punishment your rifle can dish out. Constructed using 17-4
Stainless Steel and is built to stand up to hard use. The hydraulic
seal and porting technology used in this buffer has been thoroughly
proven.
Works with factory buffer springs. But for greater
improvement and the smoothest/quietest operation, pair with a JP Tuned
and Polished Extra Power Carbine Buffer Spring or a Sprinco Blue
Enhanced Power Buffer Spring. If you need the strongest AR carbine
spring, pair with the Sprinco M-4 Extra Power Buffer Spring (their Red
Spring).
Weight: 4.8 Ounces
Length when Compressed: 3.25"
Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F - +150F
*
DO NOT USE IN 9mm Blowback AR-15s. For 9mm Blowback AR15s use the
Blitzkrieg Components 9mm buffer made by KynShot.
* For CMMG Delayed
Blowback Guns this buffer is the correct choice.
Made in USA
Features:
- Machined 17-4 Stainless Steel Buffer Body
- Most recoil reduction of any AR15 carbine buffer
- Mil-Spec rated hydraulic fluid and seals can operate in ambient temp of -30F to +150F
- Super Smooth Running
- Faster follow up shots
- Quiet Buffer Operation
- Reduced Spring Noise